Business | May 28, 2012
Maximum areal densities in HDD expected to more than double
Maximum areal densities in hard disk drives (HDD) are expected to more than double during the five-year period from 2011 to 2016, spurring continued growth for HDDs in storage-intensive applications such as video and audio systems, according to IHS.
HDD areal densities measuring data-storage capacities are projected to climb to a maximum 1,800 Gigabits (Gb) per square inch per platter by 2016, up from 744 Gb per square inch in 2011. This means that from 2011 to 2016, the five-year compound annual growth rate (CAGR) for HDD areal densities will be equivalent to 19 percent. For this year, HDD areal densities are estimated to reach 780 Gb per square inch per platter, and then rise to 900 Gb per square inch next year. “The rise in areal density will pave the way for continued growth of the HDD industry,” said Fang Zhang, analyst for storage systems at IHS. “Densities will double during the next five years, despite technical difficulties associated with the perpendicular magnetic recording (PMR) technology now used to create higher-areal-density hard disks. In particular, growth opportunities will lie in applications associated with mass enterprise storage requirements, gaming, and in digital video recorders (DVRs) where massive capacity is required to store high-definition video.” Density on the rise Areal density is the amount of data that can be physically stored in a given amount of space on a platter inside an HDD. Higher areal densities mean that data can be packed more tightly onto the surface of a disk, resulting in overall greater storage capacity. Areal density equals bit density, or bits of information per inch of a track (BPI), multiplied by tracks per inch (TPI) on a platter. This measure of density is distinct from actual HDD capacity. This is because HDDs commonly use multiple platters. HDD areal density topped the 4-terabyte (TB) mark for the first time in September 2011 with the introduction of an external hard drive from Seagate Technology that was designed for desktop applications. The Seagate HDD had five platters each with an areal density of 625 Gb per square inch, equivalent to more than 1 TB per platter. Only a year earlier in 2010, the highest areal density that could be achieved for a platter amounted to 550 Gb per square inch. While no forecast is yet available for the newly minted 4-TB hard disk drive segment of the storage industry, the current 4-TB products on the market will surely prove welcome for users hoping to accommodate copious and ever-increasing amounts of data, including storage-intensive formats like gaming, music and videos. A tale of the tape: storage capacity explodes as HDDs increase areal densities A comparison of higher-areal-density HDDs provides a clear picture of exponentially greater storage capacity. For instance, 1 TB of storage can hold approximately 350,000 MP3 songs at an estimated 2.85 megabytes per song, or up to 1 million photos at an estimated 1 megabyte per 2.4 megapixel JPEG-format photo, or up to 76 hours of uncompressed digital video at a data rate of 13 gigabytes per hour. With a 4-TB hard drive, that capacity quadruples to roughly 1 million songs, or 1,000 hours of high-definition video, or 4,000 hours of standard video, or 1,400 movies. Just five years ago, HDD storage capacity per platter was at a maximum of 180 gigabits per square inch. Platters crossed the terabyte level for the first time in 2007, with hard disk drives comprising two or more platters becoming more common as HDD storage capacities increased. Now with the 1 TB per-platter milestone already reached, 5-TB hard disk drives using five platters could be available on the market later this year. Following Seagate’s 4-TB external hard disk drive product for the desktop HDD consumer market, a 4-TB enterprise HDD suitable for business applications was released in April by Hitachi GST; Hitachi GST has since been acquired by Seagate archrival Western Digital Corp. HDDs with more than 1 TB in density per platter have also been released by the industry for the mobile market, with Toshiba’s 2.5-inch 1-TB version boasting the highest areal density for drives targeting the portable PC and consumer electronics space. New developments on the horizon All HDD manufacturers currently use PMR technology for existing HDD products, but the industry consensus is that existing PMR technology has two to three generations left before reaching its areal density limit at about 1-terabit (Tb) per square inch. In fact, despite the solid five-year CAGR for higher-density HDDs, growth rates could have been much higher were it not for PMR technology nearing its limit. Nonetheless, new developments are on the way. For instance, Seagate in March announced it had achieved in its research lab 1 Tb per square inch of areal density—30 percent higher than what could be achieved through PMR technology—by using heat-assisted magnetic recording (HAMR) technology, a promising approach to enable large increases in the storage density of hard disk drives. HAMR technology is likely to lead the way in creating next-generation HDDs, even though satisfactory costs via HAMR comparable to those of PMR have yet to be seen. In theory, however, advanced technologies like HAMR could extend HDD areal density to a range spanning 5 to 10 Tb per square inch. The highest capacity for 3.5-inch HDDs could then reach 30 to 60 TB, while the smaller and thinner 2.5- inch HDDs used in increasingly popular thinner notebooks could reach 10 to 20 TB. Such lofty heights represent approximately 10 to 20 times the capacity of current drives, with the new theoretical levels having a capacity equivalent to those of conventional small and medium business (SMB) storage systems currently on the market, marking a major leap in electronic storage for more common, non-enterprise uses.
Sonos buys French voice tech company Snips Santa Barbara-based Sonos Inc. has acquired Snips SAS, a French company specializing in AI voice platforms for connected devices that provides private-by-design voice technology.
Mouser opens local customer service center in the Philippines Distributor Mouser Electronics is continuing its expansion of its ts customer service in Asia with the addition of a Customer Service Center in the Philippines.
Perceptron, Coherix cement partnership for bead inspection Michigan industrial metrology developer Perceptron Inc. has announced a commercial partnership with fellow Great Lakes State company Coherix Inc.
Dr. Arne Schneider takes over as CEO of Elmos in 2021 The Supervisory Board of Elmos Semiconductor has decided to extend the appointment of CEO Dr. Anton Mindl until the end of 2020. After this he will have had 15 successful years as CEO and will remain closely associated with the company as consultant.
Sponsored content by Z ElektronikaZ Elektronika opens new factory in Pécs To keep up with rapid growth of the company, on the 13th September Z Elektronika celebrated the grand opening of its new electronic design and manufacturing facility close to the highway in Pécs, Hungary, which adds new features and production site to its nearby location.
Magna expands lighting capabilities by acquiring Wipac Czech Magna has agreed to acquire Wipac Czech s.r.o., a automotive lighting engineering firm located in Ostrava, Czech Republic.
Cree, STMicroelectronics fortify SiC agreement Cree Inc. and STMicroelectronics have expanded their existing multi-year, long-term silicon carbide wafer supply agreement to more than USD 500 million.
LPKF expands in Garbsen, Germany The laser specialist has started the construction of a new clean room factory for the production of glass microstructure components at its headquarters in Garbsen, Germany.
Cree, ABB form partnership for SiC technology Silicon carbide technology specialist Cree and ABB’s Power Grids business have announced a partnership to jointly expand the rollout of silicon carbide for semiconductors.
Sponsored content by EsemdaContract manufacturer Esemda opens new facility in Vilnius and expands EMS The new facility has been built with reserved space for future expansions. As Esemda constantly grows, it is of great importance to be able to rapidly increase production capacity in large volumes.
Soitec & Applied Materials to develop next-gen SiC substrates Designer and manufacturer of semiconductor materials, Soitec, is entering a joint development program with Applied Materials on next-generation silicon carbide substrates.
Swissbit to stay on top of demand with new Berlin fab Back in late July of 2018, Swissbit AG, broke ground on its new R&D and manufacturing facility in Berlin with the aim of tripling the production capacity of location. Now its already up and running.
Nuvia closes series A, eyes data center servers Santa Clara semiconductor design startup Nuvia Inc., formed earlier this year by three former top Apple Inc. design executives, has closed its series A round with USD 53 million secured.
Ingun's going global; expands in Latin America and Eastern Europe Benjamin Sontag (INGUN Prüfmittel GmbH) gave a short update on expansion plans in Latin America and Eastern Europe.
Yageo to acquire KEMET in a $1.8 billion deal Yageo Corporation and KEMET Corporation have entered into a definitive agreement under which Yageo will acquire all of the outstanding shares of KEMET’s common stock for USD 27.20 per share in an all-cash transaction valued at USD 1.8 billion.
EVG and DELO partner to expand materials and process capabilities Supplier of wafer bonding and lithography equipment for the MEMS and semiconductor industry, EV Group (eVG), is partnering with DELO, a manufacturer of industrial high-tech adhesives, in the area of wafer-level optics.
Osram recommends current takeover offer from ams Osram says it has concluded a business combination with Austrian chipmaker ams and is recommending its shareholders to accept the current takeover offer.
EpiWorld speeds up commercialisation of SiC devices with AIXTRON AIXTRON SE has provided an AIX G5 WW C system to EpiWorld International Co., Ltd for the further development of next generation silicon carbide (SiC) epitaxial wafers mainly used for the manufacturing of power devices for automotive applications.
FlexEnable makes acquisition for flex displays FlexEnable, developer of flexible organic electronics, has purchased Merck's portfolio of high-performance organic thin-film transistor (OTFT) materials.
Samsung’s CPU project ends, layoffs in CA and TX Samsung has confirmed in a letter to the Texas Workforce Commission that layoffs as a result of the closure of the CPU project at the Samsung R&D Center (SARC) in Austin, Texas and the San Jose Advanced Computing Lab (ACL) in San Jose, California, will begin December 31.
Marvell completes acquisition of Avera Semi Marvell has completed its acquisition of Avera Semiconductor, the Application Specific Integrated Circuit (ASIC) business of GlobalFoundries.
IAR Systems opens office in Taiwan Swedish IAR Systems, a supplier of software tools and services for embedded development, says the company is expanding in Asia with the opening of an office in Taipei, Taiwan.
ZF and Cree partners up to advance the electric drive ZF Friedrichshafen is teaming up with silicon carbide semiconductor specialist Cree, to create industry-leading, highly efficient electric drivelines.
Broadcom completes acquisition of Symantec Enterprise Security business Semiconductor company Broadcom, says that the company has completed its acquisition of the Enterprise Security business of Symantec CorporationLoad more news