© iFixit Business | February 14, 2012
Droid 4 Teardown
It's the dawn of a new year, and 2012 brings another update to the Droid line of smartphones. Yet, it's not all fun and games at the iFixit labs.
Motorola's labs continue to evolve the Droid into a faster, slicker, and more pleasant device to use. This appears to be the best keyboard yet, and the phone feels better in one's hand than earlier units. Yet it's not all fun and games at the iFixit labs. The newest Droid also introduces some compromises that did not exist in previous iterations: the battery is no longer user-replaceable (according to Motorola, at least), and that super-swell keyboard is now integrated into the motherboard, meaning you'll have to replace both components if a key on the keyboard fails. It's akin to having to replace your brain if your arm breaks. Consequently, the Droid 4 earns a deplorable 4 out of 10 repairability score, which is by far the lowest score we've given to a smartphone bearing the Droid name.
© iFixitHighlights: - Motorola has graced every Droid 4 with a mysterious little gem. Initially we thought it to be a SIM card eject tool, complete with a Motorola logo and fancy design -- even though you don't need the tool to take out the SIM card. However, after scanning through the four included manuals (that's right, we do read the manuals), we discovered that the object is actually a rear panel removal tool! For the first time in the history of our teardowns, a device manufacturer has actually included a tool to help take apart their device -- although it's for a procedure that shouldn't require a tool to begin with. - The first thing we observed on the innards of this Droid was a large sticker covering the battery. It contained identifying information for the phone, as well as several statements telling the user that the battery is not removable. This is a huge (negative) departure from earlier Droids, where the battery was always user-replaceable. - Removing the sticker revealed the Droid 4's battery, and confirmed our assumptions: the Droid's battery is a lot larger and more troublesome to remove than last year's model. Two T5 Torx screws and gobs of adhesive hold the battery in place. The adhesive is so strong that you may accidentally bend the battery too much (and cause it to possibly ignite) if you try removing it with just your fingers. So instead, use a flat pry tool like a spudger to pry the battery from the phone. - A liquid damage indicator cleverly placed below the micro-SIM cover thwarts our hopes of a Droid 4 deep-sea excursion. Sorry little buddy, looks like you're going to have to sit this one out. - Unlike last year's Droid, the Droid 4's keyboard pressure sensors are attached to the back of the motherboard, so you'll have to replace the entire motherboard if a key fails on your keyboard. - Cool! The keyboard letters are printed on raised rubber atop the pressure contacts. Our guess is as good as yours as to why Motorola chose to go that route; there's no benefit we can see from having the letters printed on the rubber. - Motorola definitely understood the importance of designing a good keyboard for this phone. From our limited txt-testing, it appears to be the best Droid keyboard yet. The same shows in its internal construction (aside from it being integrated into the motherboard). - Interesting: The microSD card slot is not soldered onto the motherboard, but instead held in place by two screws. The slot connects to the motherboard via some pressure-sensitive pins, as well as a rectangular multi-pin connector. - The back of the board is largely devoid of chips, save for one: the SanDisk SDIN5C1-16G flash memory that we found in the Droid Razr also graces the interior of the Droid 4. As its name suggests, this package provides the 16 GB of memory that comes with every Droid 4. - Good news: the LCD is not fused to the glass display. This means users won't have to purchase the LCD (which is significantly more expensive than just the glass) if they shatter their glass. - Not-so-good news: they will have to replace the touchscreen controller when replacing the front display glass, which will add a bit of cost to the repair. - What touchscreen controller does the Droid 4 sport, you may ask? The underside of the front panel reveals an Atmel MXT224E touchscreen controller, which we've found in several other phones in the past, including the Droid 3.
© iFixitAnd now for some chip identification: - Samsung K3PE7E00M-XGC1 4 Gb LPDDR2. - Hynix H8BCS0QG0MMR memory MCP containing Hynix DRAM and STM flash - Qualcomm MDM6600 supporting HSPA+ speeds of up to 14.4 Mbps - Qualcomm PM8028 chip working in conjunction with the Qualcomm MDM6600 to provide wireless data connection to the phone - Motorola T6VP0XBG-0001 LCM 2.0 LTE baseband processor - ZE55431140KHD, which appears to be the RAM sitting atop the 1.2 GHz main processor - Infineon 5726 SLU A1 - Skyworks 77483 700MHz LTE PA module - Avago ACPM-7868 quad-band power amplifier - Texas Instruments WL 1285C WiLink 7.0 single-chip WLAN, GPS, Bluetooth and FM solution - ST Ericsson CPCAP 6556002 System on a Chip ----- More goodies can be found at iFixit.
Cree, STMicroelectronics fortify SiC agreement Cree Inc. and STMicroelectronics have expanded their existing multi-year, long-term silicon carbide wafer supply agreement to more than USD 500 million.
LPKF expands in Garbsen, Germany The laser specialist has started the construction of a new clean room factory for the production of glass microstructure components at its headquarters in Garbsen, Germany.
Cree, ABB form partnership for SiC technology Silicon carbide technology specialist Cree and ABB’s Power Grids business have announced a partnership to jointly expand the rollout of silicon carbide for semiconductors.
Soitec & Applied Materials to develop next-gen SiC substrates Designer and manufacturer of semiconductor materials, Soitec, is entering a joint development program with Applied Materials on next-generation silicon carbide substrates.
Sponsored content by EsemdaContract manufacturer Esemda opens new facility in Vilnius and expands EMS The new facility has been built with reserved space for future expansions. As Esemda constantly grows, it is of great importance to be able to rapidly increase production capacity in large volumes.
Swissbit to stay on top of demand with new Berlin fab Back in late July of 2018, Swissbit AG, broke ground on its new R&D and manufacturing facility in Berlin with the aim of tripling the production capacity of location. Now its already up and running.
Nuvia closes series A, eyes data center servers Santa Clara semiconductor design startup Nuvia Inc., formed earlier this year by three former top Apple Inc. design executives, has closed its series A round with USD 53 million secured.
Ingun's going global; expands in Latin America and Eastern Europe Benjamin Sontag (INGUN Prüfmittel GmbH) gave a short update on expansion plans in Latin America and Eastern Europe.
Yageo to acquire KEMET in a $1.8 billion deal Yageo Corporation and KEMET Corporation have entered into a definitive agreement under which Yageo will acquire all of the outstanding shares of KEMET’s common stock for USD 27.20 per share in an all-cash transaction valued at USD 1.8 billion.
Sponsored content by Z ElektronikaZ Elektronika opens new factory in Pécs To keep up with rapid growth of the company, on the 13th September Z Elektronika celebrated the grand opening of its new electronic design and manufacturing facility close to the highway in Pécs, Hungary, which adds new features and production site to its nearby location.
EVG and DELO partner to expand materials and process capabilities Supplier of wafer bonding and lithography equipment for the MEMS and semiconductor industry, EV Group (eVG), is partnering with DELO, a manufacturer of industrial high-tech adhesives, in the area of wafer-level optics.
Osram recommends current takeover offer from ams Osram says it has concluded a business combination with Austrian chipmaker ams and is recommending its shareholders to accept the current takeover offer.
EpiWorld speeds up commercialisation of SiC devices with AIXTRON AIXTRON SE has provided an AIX G5 WW C system to EpiWorld International Co., Ltd for the further development of next generation silicon carbide (SiC) epitaxial wafers mainly used for the manufacturing of power devices for automotive applications.
FlexEnable makes acquisition for flex displays FlexEnable, developer of flexible organic electronics, has purchased Merck's portfolio of high-performance organic thin-film transistor (OTFT) materials.
Samsung’s CPU project ends, layoffs in CA and TX Samsung has confirmed in a letter to the Texas Workforce Commission that layoffs as a result of the closure of the CPU project at the Samsung R&D Center (SARC) in Austin, Texas and the San Jose Advanced Computing Lab (ACL) in San Jose, California, will begin December 31.
Marvell completes acquisition of Avera Semi Marvell has completed its acquisition of Avera Semiconductor, the Application Specific Integrated Circuit (ASIC) business of GlobalFoundries.
IAR Systems opens office in Taiwan Swedish IAR Systems, a supplier of software tools and services for embedded development, says the company is expanding in Asia with the opening of an office in Taipei, Taiwan.
ZF and Cree partners up to advance the electric drive ZF Friedrichshafen is teaming up with silicon carbide semiconductor specialist Cree, to create industry-leading, highly efficient electric drivelines.
Broadcom completes acquisition of Symantec Enterprise Security business Semiconductor company Broadcom, says that the company has completed its acquisition of the Enterprise Security business of Symantec Corporation
AVX acquires Chengdu OK New Energy AVX Corporation says it has completed the purchase of Chengdu OK New Energy, Ltd. (COKNE).
Vesper names new SVP of worldwide sales & business development MEMS sensor company Vesper, announces that Lorenzo Ponzanelli has joined the company as senior vice president of worldwide sales and business development, overseeing sales strategy and execution to drive global growth.
Gigaphoton establishes new company in China Gigaphoton, a manufacturer of light sources used in semiconductor lithography, says it has established and started running the business of a new company – Gigaphoton China Inc. in China.
Prepare, adapt & overcome - how ‘to Brexit’ The looming, but yet unknown, effects of Brexit have forced companies to prepare for whatever may come. But how does one really prepare for unknown consequences?
Acal BFi signs pan-European agreement with Champs Technologies Acal BFi says it has added Champs Technologies to its magnetics portfolio. Acal BFi is a Europe-wide specialist technology supplier and design partner with a specialist portfolio of magnetic cores and inductive components products and services.Load more news